Technical details: Variable single-roller burnishing tool for external use
Variable single-roller burnishing tool for external use
|Application||shafts, contours, recess grooves, plane surfaces|
|Standard fixture||square shank 20/25/32/40 mm|
|Swiveling range||±90 ° in 15 °-steps adjustable|
|Radius (R)||2 mm|
- Fixture VDI, HSK etc.
- Tailor made rollers for eg. carbide
Please note that this information represents standard values which must be adapted to the individual cases.
|Speed||up to 200 m/min|
|Feed rate||0.05 — 0.3 mm/rev|
|Workpiece allowance||up to 0.02 mm|
|Tool pre-load||up to 1 mm|
|Lubrication||emulsion or oil; filtration of the lubricant (< 40 μm) can improve the surface quality and the tool life|
|Pre-machining of workpiece||surface roughness up to 15 μm|
|Workpiece hardness||up to 45 HRC|
Variable single-roller burnishing tool for smoothing and hardening internal and
- adjustable angle for various contours
- Optimal design of the rollers for profile machining
- Universally applicable due to compact design
You require further information about this specific tool?
Please contact us or send us an e-mail. We will gladly inform you about further details on our tools.
Phone: +49 (0)7159 92 87-90