Technical details: Slim shaped single-roller burnishing tool

 

 

Single-roller burnishing tool for external use

Application shafts and plane surfaces, cones, grooves, undercuts
Standard fixture square shank 12/16/20 mm, left or right hand
Roller type form C/D as required

Options

  • Tailor made fixture
  • Tailor made rollers

Application parameters

Please note that this information represents standard values which must be adapted to the individual cases.

Speed up to 150 m/min
Feed rate 0.05 — 0.3 mm/rev
Workpiece allowance up to 0.02 mm
Tool pre-load up to 3 mm
Lubrication emulsion or oil; filtration of the lubricant (< 40 μm) can improve the surface quality and the tool life
Pre-machining of workpiece surface roughness up to 15 μm
Workpiece hardness up to 45 HRC


 

Slim shaped single-roller burnishing tools for external use
are non-intrinsic tools for smoothening and work hardening of external contours. Internal springs generate the required rolling force. The value of the rolling force is defined by the preload of the tool. The spring characteristics can be adapted to the requirements of the workpiece. The shape of the rollers is designed according to workpiece requirements.

 

Advantages

  • universally useable
  • low investment
  • fast return on investment
  • slim design enables the application in small spaced machine tools for example swiss type lathe machine

 

You require further information about this specific tool?

Please contact us or send us an e-mail. We will gladly inform you about further details on our tools:

Quickrequest: "Data sheet slim shaped single-roller burnishing tools"