Diamond burnishing tool for external use, angled tool, type 2

Technical Details: Data sheet external diamond burnishing, angled tool type 2

Diamond burnishing tool for external use, compact

Application external shafts, contours, plane surfaces,
thin walled workpieces
Standard-fixture square shank 16/20/25 mm
left hand or right hand
angle 15°/30°/45°/60°

 

Options

  • Tailor made fixtures according to specifications
  • Tailor made diamond shape
  • Assembly device

Application parameters

Please note that this information represents standard values which must be adapted to the individual cases.

Speed up to 150 m/min
Feed rate 0.05 — 0.2 mm/rev
Workpiece allowance up to 0.02 mm
Tool pre-load up to 1 mm
Lubrication emulsion or oil; filtration of the lubricant (< 40 μm)
can improve the surface quality and the tool life
Pre-machining of workpiece surface roughness (Rz) up to 15  μm
Suitable for hard machining  

 

You require further information about this specific tool?

Please contact us or send us an e-mail. We will gladly inform you about further details on our tools:

Quickrequest: "Data sheet external diamond burnishing, angled tool type 2"

 

ADVANTAGES

  • Simple to use
  • Compact design available for machines with limited tool space
  • Can be adapted to all materials by means of four spring elements (included in delivery)
  • Diamond radii from 0.4–5 mm available
  • Diamond indexed for multiple machining
  • Highest surface quality and hardening
  • Universally applicable
  • Ideal for contour machining
  • For hard machining and thin-walled workpieces
  • Tolerance compensation through spring-loaded design
  • Changeable diamond insert
  • Re-grinding of the diamond is possible
  • Cost-effective/low investment