Technical details: Rolling unit for external and internal grooves
Modular single–roller tool for external and internal grooves
|Application "internal"||from Ø 50 mm and up to 120 mm depth|
|Application "external"||from Ø 20 mm|
Please note that this information represents standard values which must be adapted to the individual cases.
|Speed||up to 100 m/min depending on the application|
|Feed rate||0.05 — 0.3 mm/rev|
|Workpiece allowance||up to 0.03 mm|
|Tool pre-load||up to 1.5 mm|
|Lubrication||emulsion or oil; filtration of the lubricant (< 40 μm) can improve the surface quality and the tool life|
|Pre-machining of workpiece||surface roughness up to 15 μm|
|Workpiece hardness||up to 45 HRC|
Modular single-roller burnishing tool system
for smoothening and work hardening of external and internal grooves.
- useable for both external and internal grooves
- are not dependent on diameters of the workpiece
You require further information about this specific tool?
Please contact us or send us an e-mail. We will gladly inform you about further details on our tools:Quickrequest: "Data sheet for modular single-roller tool system – rolling unit for external and internal grooves"