Technical details: Variable diamond burnishing tool for external use
Diamond burnishing tool for external use
|Application||shafts and external contours|
|Standard fixture||square shank 16/20/25 mm left or right hand|
|Swiveling range||240 °|
|Indexing||48 x 5°|
- Fixture VDI, HSK etc.
- Tailor made diamond shape
- Assembly device
Please note that this information represents standard values which must be adapted to the individual cases.
|Speed||up to 150 m/min|
|Feed rate||0.05 — 0.2 mm/rev|
|Workpiece allowance||up to 0.02 mm|
|Tool pre-load||up to 1 mm|
|Lubrication||emulsion or oil; filtration of the lubricant (< 40 μm) can improve the surface quality and the tool life|
|Pre-machining of workpiece||surface roughness (Rz) up to 15 μm|
Suitable for hard machining
Diamond burnishing tools for external use
are non-intrinsic tools for smoothening and work hardening of holes and external contours. Due to the swiveling diamond
these tools are quite versatile.
- universally useable
- suitable for hard machining and thin walled workpieces
- slim design enables the application in small spaced machine tools
- spring loaded diamond
- changeable diamond insert
- regrinding of the diamond is possible
You require further information about this specific tool?
Please contact us or send us an e-mail. We will gladly inform you about further details on our tools:Quickrequest: "Data sheet variable diamond burnishing tool for external use"